Disc Makers autograph vii User Guide
1. Introduction and Setup
The following document will provide an overview of the Disc Makers Autograph 7
printer driver. These settings can be found under the Printer and Faxes control panel. In
order to access the following menu options right click on the Autograph 7 printer icon
and left click on Printing Preferences. Right clicking on most topics under Printing
Preferences will show a What’s This? dialogue box, which once clicked, will give a
description of the option. As shown in the example below:
printer driver. These settings can be found under the Printer and Faxes control panel. In
order to access the following menu options right click on the Autograph 7 printer icon
and left click on Printing Preferences. Right clicking on most topics under Printing
Preferences will show a What’s This? dialogue box, which once clicked, will give a
description of the option. As shown in the example below:
To begin right click on the Disc Printer icon located under the Printer and Faxes control
panel. Left click on Printing Preferences. This will open the dialogue boxes in the
following sections.
1.1 Printer connections and Buttons
The 3 main connections on the Autograph 7 Disc Printer are as follows.
Printer Control:
Used by the robotics to control the opening and closing of the printer tray. It is a Mini
din type connection with 6 pins.
Power:
Only use the supplied power supply. The power supply consists of a power brick and
power cable. Connect the brick and cable securely together before use before
connecting to Printer and power outlet.
USB:
The USB cable will be the conduit for data that the printer will use in order to print
the desired image onto the disc.