Scitec stc-7001 User Manual

Page of 5
Required FCC Notice: 
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the 
ACTA.  On the bottom of this equipment is a label that contains, among other information, a 
product identifier in the format US:AAAEQ##TXXXX.  If requested, this number must be 
provided to the telephone company.   
 
The REN is used to determine the number of devices that may be connected to a telephone 
line.  Excessive RENs on a telephone line may result in the devices not ringing in response to 
an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).  To 
be certain of the number of devices that may be connected to a line, as determined by the total 
RENs, contact the local telephone company.  The REN for this telephone is part of the product 
identifier that has the format US:AAAEQ##TXXXX.  The digits represented by ## are the REN 
without a decimal point (e.g., 03 is a REN of 0.3).   
 
If this equipment causes harm to the telephone network, the telephone company will notify you 
in advance that temporary discontinuance of service may be required. If advance notice isn't 
practical, the Telephone Company will notify you as soon as possible. Also, you will be 
advised of your right to file a complaint with the FCC if you believe it is necessary. 
 
The Telephone Company may make changes in its facilities, equipment, operations, or 
procedures that could affect the operation of this telephone. If this happens, the Telephone 
Company will provide advance notice in order for you to make the necessary modifications in 
order to maintain uninterrupted service. 
 
If you experience trouble with this telephone, please contact Scitec, Inc. at (217) 384-6041 for 
repair or warranty information. If the trouble is causing harm to the telephone network, the 
Telephone Company may request that you remove this equipment from the network until the 
problem is resolved.  
 
The customer can do the following repairs: replacement of cords or handset; replacement of 
window for telephone number. 
 
Connection to party line service is subject to state tariffs.  Contact the state public utility 
commission, public service commission or corporation commission for information. 
 
This telephone cannot be used on Telephone Company provided coin service.  
If your home has specially wired alarm equipment connected to the telephone line, ensure the 
installation of the STC-7001 telephone does not disable your alarm equipment.  If you have 
questions about what will disable alarm equipment, consult your telephone company or a 
qualified installer. 
 
This equipment is hearing aid compatible. 
 
If the STC-7001 telephone is used with a leased system, permission of the owner of the 
equipment must be obtained for connection of the telephone because modification of the host 
system is often required. 
 
 
Jacks: 
A plug and jack used to connect this equipment to the premises wiring and telephone network 
must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.  A 
compliant telephone cord and modular plug is provided with this product.  It is designed to be 
connected to a compatible modular jack that is also compliant.  See installation instructions for 
details. 
 
The STC-7001 telephones use RJ11C USOC standard modular jacks.
 
 
Warranty: 
Scitec, Inc. (“Scitec”) warrants your STC-7001 telephone to be free from defects in material 
and workmanship for a period of two (2) years from the date of purchase. 
 
This warranty applies only to the original purchaser, and only to products employed in normal 
use and service in standard commercial offices, schools/universities, hotel/motel guest rooms, 
healthcare facilities, and/or residences.  
 
This Warranty is only valid for merchandise purchased directly from Scitec or from an 
authorized Scitec dealer or distributor. 
 
If this product is found to be defective  within the terms of this warranty, Scitec's only obligation 
-- and your exclusive remedy -- is the repair or replacement of this product, at Scitec's 
discretion, provided that the product has not been damaged through misuse, abuse, accident, 
modification, alteration, neglect or mishandling. 
 
This warranty shall not apply to any product found to have been improperly installed, 
configured, or used in any  way not in accordance with the instructions supplied with this 
product. 
 
For repair or replacement, please call Scitec at  (217) 384-6041 to request a “ Return 
Authorization Form.”  A simple one-page form and complete instructions will be sent to you, to 
be filled out and returned to Scitec.  You will be asked to describe the failure symptoms of your 
telephone, provide the date purchased (and proof of purchase date if requested), and provide 
the name of the Scitec dealer or distributor from which the telephone was purchased.  The 
completed form may then be faxed or mailed back to Scitec.  Then, when your return 
authorization request has been approved, Scitec will contact you with a “Return Authorization 
Number” which must be clearly placed on the outside of the box that you use to return your 
telephone.  You, the customer, are responsible for paying all shipping costs to return your 
defective product to Scitec.  Scitec then pays for shipping the repaired or replaced product 
back to you.   
 
Please note that Scitec will not accept, repair, or replace any products returned without a 
“Return Authorization Number.”  Any such product sent to Scitec without a “Return 
Authorization Number” will either be returned at the customer’s expense or be disposed of. 
 
Scitec does not warrant and specifically disclaims any warranty, whether express or implied, of 
the fitness for a particular purpose other than the warranty contained herein. No implied 
warranty on this product, created by state law, shall extend beyond the term of this warranty 
unless such law otherwise provides. 
 
Scitec specifically disclaims any liability and shall not be liable for any consequential or 
incidental loss or damage, including but not limited to damages to any equipment with which 
this product is used. Some states do not allow the exclusion or limitation of incidental or 
consequential damages so the above limitations or exclusions may not apply to you. 
 
No agent, representative, dealer or employee of Scitec has the authority to increase or alter 
the obligations or terms of this Warranty. This Warranty gives you specific legal rights and you 
may have other rights, which vary from state to state.