Sony VPL-CS6 User Guide

GB 

48

On the emergency mode

B

Before performing the following procedure, 
try to diagnose the problem using the 
instructions described in "Troubleshooting" 
(page 44). If the problem persists, read and 
following procedure thoroughly and then 
proceed.

The projector is equipped with the 
emergency mode for the lens protector and 
the powered tilt adjuster. If the powered 
function does not work, you can operate the 
lens protector and the tilt adjuster 
(emergency mode) manually.

Perform this procedure only in an 
emergency case. You cannot recover the 
powered function yourself if you perform 
this procedure. After you use the projector in 
the emergency mode, consult with qualified 
Sony personnel immediately.

Place a protective sheet (cloth) 
beneath the projector. Turn the 
projector over so you can see its 
underside.

Slide switch A in the slit in front of the 
adjuster in the direction of the arrow 

(toward the front panel of the projector) 
with the small minus screwdriver.
The lens protector and the tilt adjuster 
are switched to the emergency mode

.

When opening/closing the lens 
protector, turn the groove of the 
adjuster with a coin.

When the lens protector is left open, or 
the tilt adjuster is extended, turn the 
groove counterclockwise (in direction of 
the arrow).

Adjuster

A

Slit