Minuteman rpm 1609 User Guide
6
4. Installation
Procedure
1.
Install the mounting brackets.
The RPM comes with brackets for mounting in a standard 19-inch rack. To
mount the RPM into a rack perform the following procedure:
mount the RPM into a rack perform the following procedure:
•
Attach the mounting brackets to the unit as shown, using the four
retaining screws provided for each of the brackets.
retaining screws provided for each of the brackets.
•
Choose a location for the brackets. A notched hole on the vertical rail
denotes the middle of a U slot.
denotes the middle of a U slot.
•
Align the mounting holes of brackets with the notched hole on the vertical
rail and attach with the retaining screws.
rail and attach with the retaining screws.
2.
Connect all input and output connectors.
3.
Connect Ethernet cable to RPM.