Frigidaire feb24s2asc Data Sheet
2
FIRST RISE
It is normal to see a temperature overshoot in the
first rise of all modes when you monitor the temperature.
first rise of all modes when you monitor the temperature.
Set point
First rise overshoot
T
°
t (sec)
Electric Models: During a normal bake mode, the control preheats the oven by alternate bake & broil elements.
When the desired temperature is reached, the control adds top heat by cycling the broil element on for approx. 5
seconds per minute. The bake element is on for the remaining time of the minute. Both elements use full power
when they are on but they are never on at the same time.
When the desired temperature is reached, the control adds top heat by cycling the broil element on for approx. 5
seconds per minute. The bake element is on for the remaining time of the minute. Both elements use full power
when they are on but they are never on at the same time.
Gas Models: Only the bake element is used all the time.
NORMAL BAKE
ES100 ELECTRONIC OVEN CONTROL
Note: The ES100's are not field repairable.
Note: Depending on model, the size and shape of touch pads may vary (for example round instead of elliptical).
OVEN CALIBRATION
Set the electronic oven control for normal baking at 350°F. Obtain an average oven temperature after a minimum
of 5 cycles.
of 5 cycles.
The oven calibration can be modified using the oven control display. Please refer to the Owner's Guide manual.
Note: Changing calibration affects all the cooking modes but not the clean and the broil modes.