Arturia cs-80v User Manual
ARTURIA – CS-80V – USER’S MANUAL
80
Connection of the CS-80V to a MIDI node
We can thus also control the CS-80V through a command keyboard (see the Digital
Performer manual for the connection of this type of device).
Performer manual for the connection of this type of device).
8.5.4 Saving presets
When the session is saved, the state of the CS-80V is saved as is, even if the
programming corresponds to no preset. For example, if you were working on a preset
programming corresponds to no preset. For example, if you were working on a preset
«BassOne» on which you had changed settings (without saving them as «BassTwo»), the
next time you open the song, the CS-80V will load the preset «BassOne» plus the
next time you open the song, the CS-80V will load the preset «BassOne» plus the
changes.
The dropdown menu offered by Digital Performer to save the settings of a plug-in does
work with the CS-80V. Nonetheless, we recommend that you use the internal menu of
work with the CS-80V. Nonetheless, we recommend that you use the internal menu of
the CS-80V. This is for several reasons:
Presets saved in this manner can be used in any other sequencer, making the
exchange between users easier.
They will be compatible with the different versions of the CS-80V that will appear
later on.
8.5.5 Automation
Automation works with the CS-80V like any other MAS plug-in (refer to the Digital
Performer documentation for more details on the automation of plug-ins). The changes in
presets (an so the movement of cables) cannot be automated.
Performer documentation for more details on the automation of plug-ins). The changes in
presets (an so the movement of cables) cannot be automated.