Intel SC5650BCDP User Manual
Product Overview
Intel
®
Server System SC5650BCDP TPS
Intel order number: E80367-002
Revision 1.5
2
2. Product Overview
The Intel
®
Server System SC5650BCDP is a 5U server system which integrates the Intel
®
Server Board S5500BC into the Intel
®
Server Chassis SC5650DP. The server system features
are designed to support the high-density server market. This chapter provides a high-level
overview of the system features. Greater detail for each major system component or feature is
provided in the following chapters.
overview of the system features. Greater detail for each major system component or feature is
provided in the following chapters.
Table 1. System Feature Set
Feature
Description
Dimensions
17.8 inch (45.2 cm) x 9.256 inch (23.5 cm) x 19 inch (48.3 cm)
Server Chassis
Intel
®
Server Chassis SC5650DP
Server Board
Intel
®
Server Board S5500BC
Processor
LGA 1366 sockets supporting up to two Intel
®
Xeon
®
processor 5500 series and 5600 series
with Intel
®
QuickPath Interconnect (QPI) and Integrated Memory controllers.
•
Supports up to 95 W Thermal Design Power (TDP)
•
4.8 GT/s, 5.86 GT/s, and 6.4 GT/s Intel
®
QuickPath Interconnect (Intel
®
QPI)
• EVRD11.1
For a complete list of supported processors, see:
http://support.intel.com/support/motherboards/server/s5500bc/compat.htm
Memory
Eight DDR3 DIMM slots supporting up to 32 GB of DDR3 800/166/1333 MT/s ECC Registered
(RDIMM), or ECC Unbuffered (UDIMM) DDR3 memory
• Four memory sockets support CPU_1 and four memory sockets support CPU_2.
NOTE: Mixed memory is not tested or supported. Non-ECC memory is not tested and is not
recommended for use in a server environment
(RDIMM), or ECC Unbuffered (UDIMM) DDR3 memory
• Four memory sockets support CPU_1 and four memory sockets support CPU_2.
NOTE: Mixed memory is not tested or supported. Non-ECC memory is not tested and is not
recommended for use in a server environment
Chipset
• Intel
®
I/O Hub (IOH) 5500 chipset
• Intel
®
82801Jx I/O Controller Hub 10 Raid (ICH10R)
• ServerEngines* LLC Pilot II BMC controller (Integrated BMC)
Peripheral Interfaces
External connections:
•
DB-15 video connector (back)
•
RJ-45 serial Port A connector
•
Two RJ-45 10/100/1000 Mb network connections
•
Four USB 2.0 connectors (back)
•
One USB 2.0 connector (front)
Internal connections:
•
Two USB 2x5 pin header, each supports two USB 2.0 ports
•
One DH-10 Serial Port B header
•
Six Serial ATA (SATA) II connectors
•
One SSI-EEB compliant front panel header
•
One SSI-EEB compliant 24-pin main power connector
•
One SSI-compliant 8-pin CPU power connector
•
One SSI-compliant 5-pin auxiliary power connector
•
One 4-Pin SGPIO connector