Microtek mv320 User Guide

A1: The DV camera is not powered up.

• Press and hold the POWER button for a few moments to see if the

READY LED is lit.

A2: The battery is inserted incorrectly.

• Insert the battery with the correct polarity as marked in the battery

compartment.

A3: The battery has poor electrical contact with the terminals in the

battery compartment.

• Clean the battery terminals with a dry cloth, reinsert them, and try

to power on the DV camera again.

A4: Battery power is depleted.

• Recharge the battery if it is rechargeable, or replace the batteries

with new ones.

A5: The incorrect type of battery is being used.

• Replace with four new AAA-sized alkaline batteries.
• Replace with a new Lithium ion battery (Nokia 8210 compatible).

A6: The battery/SD card door is open.

• Close the battery/SD door securely.

A1: Your DV camera has a two-minute time-out setting for saving battery

consumption.

• You can disable the “Power Saving” feature in the Setup menu.

Press any button to turn the LCD screen back on or the POWER

button to turn the DV camera on.

A2: Battery power is depleted.

• Recharge the battery if it is rechargeable, or replace the battery with

new ones.

The DV camera does not power on.

The DV camera turns off suddenly.