Microtek 120tf Operating Guide
ArtixScan 120tf Installation and Operation Manual 11
Using the 35mm Filmstrip Holder
Six frames can be mounted into the 35mm filmstrip holder.
1. Push to open the holder.
2. Flip the 35mm filmstrip face down and place it into the holder. Align the frame-by-
frame partitions on your filmstrip to match the partitions on the holder.
3. Close the 35mm filmstrip holder.
Slightly adjust the 35mm filmstrip by pushing the holder lid to ensure the
filmstrip’s partitions to match the holder’s partitions.
filmstrip’s partitions to match the holder’s partitions.
2
3
4
5
6
1
Caution: When the filmstrip holder is closed and the 35mm filmstrip is aligned
correctly, do not lock the holder lid against the side of the holder (indicated by an
arrow mark) by force or touch the filmstrips. If you do so, this will bend the
original and may result in out-of-focus scans.
correctly, do not lock the holder lid against the side of the holder (indicated by an
arrow mark) by force or touch the filmstrips. If you do so, this will bend the
original and may result in out-of-focus scans.