Microtek 120tf Operating Guide

2     ArtixScan 120tf Installation and Operation Manual

Before unpacking your scanner, make sure that the location where the scanner will be
installed is large enough for easy operation.

•

Make sure that the operating environment for the scanner is free of dust and other
contaminants.

•

Allow adequate ventilation space (no less than

 

39.8" or 91.6 cm) around the

scanner.

•

Place the scanner on a flat, stable surface that is not subject to vibration.

•

Make sure that the scanning surface will not be exposed to direct sunlight or other
sources of bright light.

•

Avoid placing the scanner close to sources of extreme cold or heat.

•

Avoid connecting the scanner to a power source that might experience power
surges.

•

Avoid positioning the scanner in the path of heavy traffic where it may get
bumped.

•

Place the scanner within 3 feet of the computer. Use the FireWire cable or the SCSI
cable that came with your scanner.

Once the scanner has been placed in a suitable location and is ready to be connected
to the host computer, it is time to proceed with installation of the necessary hardware
and software components for the scanner.