Microtek 1000xl User Guide
14 ArtixScan 2500 Installation and Operation Manual
English
7.
When you get a “No conflicts” message in the
Conflicting device list, the Memory Range conflict is
resolved. Take similar steps for the Interrupt Request
(IRQ) and Input/Output Range resources. If all of
IRQs are taken, you need to contact your computer
dealer for help on how to free up an IRQ resource.
Conflicting device list, the Memory Range conflict is
resolved. Take similar steps for the Interrupt Request
(IRQ) and Input/Output Range resources. If all of
IRQs are taken, you need to contact your computer
dealer for help on how to free up an IRQ resource.
8.
When the settings are all correct, click OK to save
the modifications. The dialog box should now show
the correct Interrupt Request, Memory Range, and
Input/Output address settings.
the modifications. The dialog box should now show
the correct Interrupt Request, Memory Range, and
Input/Output address settings.
If you are asked to shut down your computer, select
No, then click Close. You will be asked whether you
wish to restart your computer. Click Yes and restart
your computer.
No, then click Close. You will be asked whether you
wish to restart your computer. Click Yes and restart
your computer.
No conflicts
found
found
Resolving situation C
1.
Click Start, Settings, and select Control Panel.
2.
Double-click Add New Hardware.
3.
Click Next and select No for “Do you want Windows
to search for your new hardware?”.
to search for your new hardware?”.
4.
From the next menu, select SCSI controllers and
click Next.
click Next.
5.
Select Adaptec on the left and “Adaptec AIC-7850
PCI SCSI Controller” on the right. Click
PCI SCSI Controller” on the right. Click
6.
When the “Add New Hardware Wizard” dialog box
appears, click Finish.
appears, click Finish.