Microtek 1800f Operating Guide
ArtixScan 1800f Installation and Operation Manual 1
Introduction
The ArtixScan 1800f is a single-pass, dual interface (FireWire and USB 2.0), 48-bit,
high-resolution scanner with two scanning beds — the upper bed for scanning
reflective materials such as photos and prints, and the lower bed for scanning
transparent media such as film, slides, and filmstrips. The ArtixScan 1800f is
specifically designed for graphic arts and imaging professionals.
high-resolution scanner with two scanning beds — the upper bed for scanning
reflective materials such as photos and prints, and the lower bed for scanning
transparent media such as film, slides, and filmstrips. The ArtixScan 1800f is
specifically designed for graphic arts and imaging professionals.
This manual will help you in the
installation and operation of your
scanner, and the information provided
covers both Macintosh and PC
environments.
installation and operation of your
scanner, and the information provided
covers both Macintosh and PC
environments.
System Requirements
•
CD-ROM drive (for installing software)
•
Color display with 24-bit color output capability
•
128MB RAM or more recommended
FireWire
•
PC
- Pentium II or later with built-in FireWire port or FireWire card installed
- Windows 98 SE, 2000, Me, or XP
- Windows 98 SE, 2000, Me, or XP
•
Mac
- iMac DV or new G3/G4 with built-in FireWire support
- Mac OS 9.x
- Mac OS 9.x
USB 2.0 (USB 2.0 features backward compatibility to USB 1.1)
•
PC
- Pentium II or later with USB 1.1 port or with USB 2.0 card installed
- Windows 98, 2000, Me, or XP
- Windows 98, 2000, Me, or XP
•
Mac
- iMac or G3/G4 with built-in USB 1.1 port
- Mac OS 8.6, or 9.x
- Mac OS 8.6, or 9.x