Microtek 2020 Supplementary Manual
4 ArtixScanDI 2020 Supplement
Positioning Your Documents
This section shows you how to position a single-sheet document, as well as a stack
of documents.
of documents.
To position a single-sheet document (such as a single photograph or a page from a
book):
book):
Raise the scanner lid, and place the document to be scanned face down on the
scanner glass surface. Place the top end of the document towards the back of the
scanner, then lower the scanner lid on the scanner glass surface.
scanner glass surface. Place the top end of the document towards the back of the
scanner, then lower the scanner lid on the scanner glass surface.
To position a stack of documents:
Pull out the Feed Tray Extender, and load the stack of originals onto the Document
Feed Tray, with the side to be scanned facing up. Push the stack of papers onto the
tray until the papers' edges touch the front edge of the Document Feed Tray.
Feed Tray, with the side to be scanned facing up. Push the stack of papers onto the
tray until the papers' edges touch the front edge of the Document Feed Tray.
With the document face down on
the scanning glass, align the
document against the Horizontal
Ruler of the scanner.
the scanning glass, align the
document against the Horizontal
Ruler of the scanner.
When scanning, the rear glass
surface should be kept clear and
free of obstruction at all times.
surface should be kept clear and
free of obstruction at all times.