Microtek 1000xl Reference Manual

Scanner Driver Manager

The Scanner Driver Manager keeps track of the scanners being used on your
system and the bus / ID numbers occupied by the scanners. By keeping a record
of this information, the Scanner Driver Manager allows ScanWizard Pro to start
up more quickly, as there is no need to look for devices on the other buses.

When ScanWizard Pro is run the first time, all connected scanners are added to
the list.

To add a scanner

Follow the hardware installation instructions for connecting a scanner to your
system. Then you can use the Scanner Driver Manager in ScanWizard Pro to add
or include the connected scanner to your scanner list. Whenever you change
the SCSI / USB ID or SCSI / USB bus of a scanner, you will have to follow the
steps below.

1.    Go to the Scanner menu in the Preview window, and choose Scanner Driver

Manager. A dialog box will appear showing the current scanner list with  the
corresponding SCSI or USB bus / ID number.

2.    Click the Find Scanners button. In case you have added new scanners, the

newly found scanners will be appended to the scanner list. If a scanner on
the list is not detected (not turned on, not ready, or removed from the
system), the model will not be removed from the list but will have a question
mark before it. See below for details on how to remove a scanner.

3.   Click the Close button to close the dialog box.