Microtek 1000xl User Guide

16     ScanMaker 1000XL Supplement

To scan reflective originals such as photos, you can use the ScanMaker 1000XL
with or without the TMA 1000XL.

A. If you purchased your ScanMaker 1000XL without the TMA 1000XL, simply lift

the scanner lid, and place the reflective original to be scanned on the scanner
glass surface. Center the original along the U-shaped ruler on the scanner.

1

0

3

4

5

6

6

5

4

3

2

1

1

0

3

4

5

6

6

5

4

3

2

1

B. If you purchased your ScanMaker 1000XL with the TMA 1000XL, you will need

to use the Black Plate included with your TMA 1000XL package to shield
unwanted light.

1. Place the reflective original face down on the scanner glass surface. Center

the original along the U-shaped ruler on the scanner.

2. Peel the protective film from the Black Plate.

3. Put the Black Plate on top of the reflective

photo to be scanned, so that the Plate covers
the photo. The side of the Black Plate that reads
“This side up” should be facing up.

4. Gently lower the TMA 1000XL down onto the scanner glass surface.