Microtek 1000xl User Guide

4     ScanMaker 1000XL Supplement

Before you can operate the scanner, you will need to unlock the scanner. To unlock
the scanner, follow the steps below:

1. Remove the yellow “Step 3” sticker

from your scanner.

2. Look for the unlocking screw at the

bottom of the scanner.

3. Using a screwdriver, push and turn

the locking screw counterclockwise
to the unlock position.

When successfully unlocked, the
screw will push out a little,
protruding slightly from the bottom
of the scanner.

If you have to transport the scanner, you will need to lock the scanner back. Follow
the steps below:

1. Turn off the scanner if your scanner

is on.

2. Turn the scanner back on. The

scanner’s carriage will move to the
standby position in a few moments.

3. When the indicators on the front of

your scanner stop blinking, use a
screwdriver, and then push and turn
the locking screw clockwise to the
locked position.

When the screw has been
tightened, this indicates that your scanner is locked.

4. Turn off your scanner. The scanner is now ready for transport.