Clover tft2500rx Installation Guide
1.CHARGE LED (RED)
Indicates that the built-in battery is being charged.
2.POWER JACK (DC 5V)
Plug the supplied DC 5V 700mA adapter.
3.POWER ON LED (GREEN)
Indicates that the power is ON or OFF.
4.ANTENNA
Sends audio and video signals.
5.POWER OFF
When the switch is at this position, the power is off.
6-9. SEL (CHANNEL SELECTION) KNOB
Must select the same channel on both transmitter and
receiver.
10.IR LED
Automatically turns on at night to view objects in darkness.
11.MOUNTING BRACKET
Install the mounting bracket where you want to.
12. ANTENNA
Sends audio and video signals.
Indicates that the built-in battery is being charged.
2.POWER JACK (DC 5V)
Plug the supplied DC 5V 700mA adapter.
3.POWER ON LED (GREEN)
Indicates that the power is ON or OFF.
4.ANTENNA
Sends audio and video signals.
5.POWER OFF
When the switch is at this position, the power is off.
6-9. SEL (CHANNEL SELECTION) KNOB
Must select the same channel on both transmitter and
receiver.
10.IR LED
Automatically turns on at night to view objects in darkness.
11.MOUNTING BRACKET
Install the mounting bracket where you want to.
12. ANTENNA
Sends audio and video signals.
INSTALLATION