Microtek 4500t Operating Guide
6 ArtixScan 4500t Installation and Operation Manual
English
Powering up
A. Connecting the scanner to the power source
Connect the scanner to a voltage source directly by using the supplied power cord. Make
sure that the power outlet will not be overloaded when the scanner is turned on, and
ensure that other devices requiring significant power are not plugged into the same
outlet. Ideally, no other devices should share the scanner’s power source.
sure that the power outlet will not be overloaded when the scanner is turned on, and
ensure that other devices requiring significant power are not plugged into the same
outlet. Ideally, no other devices should share the scanner’s power source.
B. Performing the power-on self-test
The power-on test is a quick self-checking mechanism that the scanner carries out after
you turn it on.
you turn it on.
This is what happens after the scanner is turned on:
1. Close the Front Cover.
Note
Note
Note
Note
Note: This step is a must. Without closing the Front Cover, your scanner stays at the
Not Ready state.
Not Ready state.
Front Cover