Microtek 3700 User Guide

Only one scanner can be accessed at a time. To switch among 

various scanners, select the scanner to be used.

This command provides information about your current scanner. 

When you choose this command, a dialog box appears showing the 

scanner model, Scanner ID number, and firmware version.

This command displays the detected scanner devices.

If your scanner does not show in the list, make sure your scanner is 

connected and turned on, then click on the Probe button in the 

dialog box.

(for Macintosh only)

The Scanner Driver Manager keeps track of the scanners being used 

on your system and the interface bus/ID numbers occupied by the 

scanners. By keeping a record of this information, the Scanner 

Driver Manager allows ScanWizard 5 to start up more quickly, as 

there is no need to look for devices on the other interface buses.

Follow the hardware installation instructions for connecting a 

scanner to your system. Then you can use the Scanner Driver 

Manager in ScanWizard 5 to find the connected scanner in your 

scanner list.

1.  Go to the Scanner menu in the Preview window, and choose 

Scanner Driver Manager. A dialog box will appear showing the 

connected scanner and the corresponding interface ID 

number.

2.  Click the Find Scanners button. In case you have added new