Microtek 3700 Quick Reference Card

ScanMaker i700 Installing and Getting Started     11

The EZ-Lock 35mm Filmstrip Holder can simultaneously hold two strips of 6 frames
each, or a total of 12 frames.

1. Load the filmstrip face down inside the holder. Slide the filmstrip along the slots

of the holder until the filmstrip is fully loaded.

2. Raise the scanner lid, then place the holder with the loaded film on the scanner

glass surface, as shown in the illustration.

3. Gently lower the scanner lid down onto the scanner glass surface; the lid should

be able to close completely.

4. Double-click the ScanWizard 5 icon ( ) on your desktop to launch the

ScanWizard 5 Standard Control Panel, then click the Switch icon ( )on the right
corner of the Standard Control Panel to switch to the Advanced Control Panel.

5. Click the Scan Material button

( ), and choose Negative Film.
For Mac OS X, select Negative
from the Scan Material drop-down
menu.

Align the frame-by-frame partition
with the dash marks on the film
guide.

For a short filmstrip, make sure the
film edge is close to the open end of
the slot.

The calibration window on the glass
surface should be kept clear and free
from any obstruction during scanning.

To make sure the auto
multiframe cropping
feature performs
correctly, align the
holder’s front edges
flush against the top
ruler of the scanner.