Microtek 1000xl Supplementary Manual
ScanMaker i900 Supplement 21
Scanning Damaged Photos
1. Raise the scanner lid, and place the damaged photo to be scanned face down on
the scanner glass bed, towards the front of the scanner. Center the top of the
photo along the horizontal ruler on the scanner.
photo along the horizontal ruler on the scanner.
Place photo here for
photo restoration
Direction of
carriage moving
carriage moving
Note: If the creases lie in the same
direction where the carriage is moving,
the creases may not be detected by the
scanner. To fix this problem, position your
photo slightly skewed (min. 10°, max.
45°), so that none of the creases are
parallel to the direction of the moving
carriage.
direction where the carriage is moving,
the creases may not be detected by the
scanner. To fix this problem, position your
photo slightly skewed (min. 10°, max.
45°), so that none of the creases are
parallel to the direction of the moving
carriage.
2. Launch ScanWizard Pro.
3. Go to the Preview window and
choose Reflective from the Scan
Material menu.
Material menu.
4. Optional: If calibration has been
performed, go to the Settings window
in ScanWizard Pro. Choose the profile
you have just created in the Input
Profile / Scanner Profile menu.
in ScanWizard Pro. Choose the profile
you have just created in the Input
Profile / Scanner Profile menu.