Microtek 1000xl Supplementary Manual
ScanMaker i900 Supplement 27
Scanning Negative Film
1. Select the film you wish to scan.
Follow the procedures for positioning
transparent film load the film to be scanned.
transparent film load the film to be scanned.
2. Insert the film holder into the transparency
bay of the scanner. Make sure nothing is on
the scanner glass surface (the upper bed).
the scanner glass surface (the upper bed).
3. Launch ScanWizard Pro.
If this is your first time to scan transparent media, you will be prompted to perform
color calibration for your scanner. A Calibration Reminder window appears.
color calibration for your scanner. A Calibration Reminder window appears.
-
Click the Skip button to exit the “Calibration Reminder” window. Clicking the
Skip button allows you to use the factory default ICC profile for your scanner.
Skip button allows you to use the factory default ICC profile for your scanner.
-
Click the Calibrate button to run the Microtek Scanner ICC Profiler (MSP)
program to perform color calibration and to customize the ICC profile for your
scanner. After finishing with calibration, relaunch ScanWizard Pro.
program to perform color calibration and to customize the ICC profile for your
scanner. After finishing with calibration, relaunch ScanWizard Pro.
Note: For details on how to install the MSP program and how to use it to
calibrate the scanner, refer to section of the manual titled “Using the Microtek
Scanner ICC Profiler”.
calibrate the scanner, refer to section of the manual titled “Using the Microtek
Scanner ICC Profiler”.
4. Go to the Preview window and
choose Negative / Negative Film
from the Scan Material menu.
from the Scan Material menu.
Allows you to specify
how often you wish to
be prompted to calibrate
the scanner. The default
setting is 14 days
how often you wish to
be prompted to calibrate
the scanner. The default
setting is 14 days