Microtek v6upl Installation Guide
Microtek Scanner
Installation Guide
Installation Guide
for the ScanMaker
®
V6
UPL
1. Unpack scanner
Open your scanner package and check the
components as stated in your packing list. Before
proceeding any further, check that you have the
items listed on the packing list. If any item is missing,
contact Microtek.
components as stated in your packing list. Before
proceeding any further, check that you have the
items listed on the packing list. If any item is missing,
contact Microtek.
Use this installation guide if you have: 1) Windows 95 / Windows NT 4.0; or 2) if you have Windows 98 but have no USB port.
This document provides information on how to install your Microtek scanner on a PC using the scanner’s Parallel Port
(EPP) interface.
This document provides information on how to install your Microtek scanner on a PC using the scanner’s Parallel Port
(EPP) interface.
Parallel Port Installation on the PC
Version
For PC
(Windows
®
95/98/
NT4.0)
Parallel Port
Your Microtek ScanMaker scanner comes with two
built-in interfaces: USB and Parallel. For parallel
(EPP) installation, use the scanner’s parallel port.
See the graphic below to locate the different ports
on the back of the scanner, including the scanner
accessory port.
built-in interfaces: USB and Parallel. For parallel
(EPP) installation, use the scanner’s parallel port.
See the graphic below to locate the different ports
on the back of the scanner, including the scanner
accessory port.
Energy Star Notice
As an ENERGY STAR Partner,
Microtek International, Inc. has
determined that this scanner
meets the ENERGY STAR
guidelines for energy efficiency.
Microtek International, Inc. has
determined that this scanner
meets the ENERGY STAR
guidelines for energy efficiency.
Port A
(Parallel Port;
connect to
your PC)
Accessory
Port
Power
Connector
Printer Port
(Connect to
your printer)
USB
Port
Copyright © 1999 Microtek Lab, Inc.
http://www.microtekusa.com
MQ0006099
Enhanced
Parallel
Port
Parallel
Port