Novation remote le User Guide
15
Toggle - when the button is pressed for the first time the
Note On data is sent. The next press causes the Note Off
data to be sent. The next press causes the Note On data to
Note On data is sent. The next press causes the Note Off
data to be sent. The next press causes the Note On data to
be sent and so on.
The remaining pages of the menu for Note On/Off
The remaining pages of the menu for Note On/Off
messages are identical to the corresponding pages for CC
data (see previous pages).
data (see previous pages).
Individual Template Edit 'Program
Change' menu options
Page 1 is the same for all Template Edit menus (Control
Type - see page 11 for details).
Page No Page Name DATA encoder selects
2 Program
Type - see page 11 for details).
Page No Page Name DATA encoder selects
2 Program
Change
Program Change value
3
MIDI Channel
MIDI channel for this control
4 MIDI
Port
Routing
MIDI port for this control
5
Control Name Name of control
Here is a detailed breakdown of each page of the individual
Template Edit menu once 'Program Change' has been
selected on Page 1. Note that Program Change can only be
selected for buttons:
selected on Page 1. Note that Program Change can only be
selected for buttons:
Edit Menu Page 2 - Program Change
This page allows a Program Change data value to be
selected by rotating the DATA encoder to make XXX a
value of between 0 and 127. Be aware that some MIDI
devices number programs from 1 to 128 instead of 0 to
selected by rotating the DATA encoder to make XXX a
value of between 0 and 127. Be aware that some MIDI
devices number programs from 1 to 128 instead of 0 to
127; in this case, the number 1 (on the MIDI device) will
correspond to 0 (on the ReMOTE LE) and 128 (on the
device) to 127 (on the LE).
correspond to 0 (on the ReMOTE LE) and 128 (on the
device) to 127 (on the LE).
When set to a Program Change type control, a button will
only function in Momentary mode. That is, when pressed
the Program Change data will be transmitted. When
released, a Note off will be transmitted.
The remaining pages of the menu for Program Change
The remaining pages of the menu for Program Change
messages are identical to the corresponding pages for CC
data (see previous pages).
data (see previous pages).
Individual Template Edit 'Pitch Bend'
menu options
menu options
Page 1 is the same for all Template Edit menus (Control
Type - see page 11 for details). Note that this can only be
Type - see page 11 for details). Note that this can only be
assigned to the joystick or X/Y touchpad.
Page No Page Name DATA encoder selects
Page No Page Name DATA encoder selects
2
MIDI Channel
MIDI channel for this control
3 MIDI
Port
Routing
MIDI port for this control
4
Control Name Name of control
As there are no other parameters to define, once 'Pitch
Bend' has been chosen on page 1, the menu moves straight
to the MIDI Channel page. These last pages are identical to
the corresponding pages for CC data (see previous pages).
the corresponding pages for CC data (see previous pages).
Individual Template Edit 'Aftertouch'
menu options
menu options
Page 1 is the same for all Template Edit menus (Control
Type - see page 11 for details).
Type - see page 11 for details).
Page No Page Name DATA encoder selects
2
MIDI Channel
MIDI channel for this control
3 MIDI
Port
Routing
MIDI port for this control
4
Control Name Name of control
As there are no other parameters to define, once
'Aftertouch' has been chosen on page 1, the menu moves
straight to the MIDI Channel page. These last pages are
identical to the corresponding pages for CC data (see
previous pages).
identical to the corresponding pages for CC data (see
previous pages).
Prog Chg Value:
XXX