Nortel 2526T User Guide
Securing your system
41
Parameters and
variables
variables
Description
•
snmp
— provides list access using SNMP,
including the Device Manager
•
web
— provides list access using the Web-based
management system
source-ip <1-10>
<XXX.XXX.XXX.XXX>
Specifies the source IP address from which access
is allowed. Enter the IP address either as an integer
or in dotted-decimal notation.
is allowed. Enter the IP address either as an integer
or in dotted-decimal notation.
[mask <XXX.XXX.XXX.X
XX>]
Specifies the subnet mask from which access
is allowed; enter the IP mask in dotted-decimal
notation.
is allowed; enter the IP mask in dotted-decimal
notation.
no ipmgr command for management system
The
no ipmgr
command disables the IP manager list for Telnet, SNMP, or
HTTP access. The syntax for the
no ipmgr
command for the management
systems is:
no ipmgr {telnet|snmp|web}
The
no ipmgr
command is executed in the Global Configuration command
mode.
describes
the parameters and variables for the
no ipmgr
command.
Table 4
no ipmgr command for management system
no ipmgr command for management system
Parameters and
variables
variables
Description
telnet|snmp|web
Disables IP manager list checking for access to
various management systems:
various management systems:
•
telnet
— disables list check for Telnet access
•
snmp
— disables list check for SNMP, including
the Device Manager
•
web
— disables list check for the Web-based
management system
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.