Novation remote25sl User Guide
MAIN FEATURES AND OPERATION
The Template Edit Mode Menu
•
27
•
The Template Edit Mode (Editing A Template)
The menu in Template Edit Mode is used to define the settings of each of the programmable front panel
controls which comprise a Template. The pages which make up the menu are different according to the
type of MIDI information to be transmitted by the control. For example if a CC type of control is chosen,
the menu path will be different for that of a SYSEX type control
controls which comprise a Template. The pages which make up the menu are different according to the
type of MIDI information to be transmitted by the control. For example if a CC type of control is chosen,
the menu path will be different for that of a SYSEX type control
It is always the last touched control which is edited. If no control has been touched since the ReMOTE 25
was turned on, the default control selected for editing will be Pot one (the knob at the top left corner). The
controls which can be edited are any of the 8 programmable knobs, buttons or sliders, the 24 programma-
ble buttons in the Template area, the X / Y touchpad or any of the Transport buttons.
was turned on, the default control selected for editing will be Pot one (the knob at the top left corner). The
controls which can be edited are any of the 8 programmable knobs, buttons or sliders, the 24 programma-
ble buttons in the Template area, the X / Y touchpad or any of the Transport buttons.
Because the displayed menu pages are always in context according to the type of MIDI message used by
the currently selected control (and in some cases, the type of control itself), the information shown on the
display may change if a new control is touched during the editing process.
the currently selected control (and in some cases, the type of control itself), the information shown on the
display may change if a new control is touched during the editing process.
The first page of the Template Edit Menu is always displays / prompts for the type of control. In the exam-
ple below it is a ‘CC’ type.
ple below it is a ‘CC’ type.
Control Type:
CC
The type of MIDI information that will be transmitted for the control is specified in this page. The options
available depend upon the type of control selected for editing. These are :
available depend upon the type of control selected for editing. These are :
CC
Continuous Controller. Any controller number can be used, however
the MIDI standard defines controller numbers 0, 6, 32, 38, 96, 97, 98,
99, 100, 101 & 120-127 for specific specialised purposes. These values
should not be used unless the consequences upon the connected MIDI
device are appreciated.
the MIDI standard defines controller numbers 0, 6, 32, 38, 96, 97, 98,
99, 100, 101 & 120-127 for specific specialised purposes. These values
should not be used unless the consequences upon the connected MIDI
device are appreciated.
NRPN
Non-registered Parameter Number.
RPN
Registered Parameter Number.
MMC
MIDI Machine Control. This can only be selected for buttons.
Note On/Off
Note On / Note Off message. This can only be selected for buttons.
SYSEX MESSAGE
System Exclusive string. This can contain a value altered by the control. A
string of up to 20 bytes can be defined for each control.
string of up to 20 bytes can be defined for each control.
Program Change
Program Change message. This can only be selected for buttons.
Pitch Bend
Pitch Bend. This can only be selected for the X / Y Touchpad.
No Control
The control will transmit no MIDI when touched. There are no further menu
pages available if this option is selected.
pages available if this option is selected.