Novation remote25sl User Guide

• 

38

•

If the pad is pressed and kept pressed the display will show the name (if already programmed in the
Template) of the control and its type of control and additional MIDI information in the same format than for
any other control.

If the X1 area is pressed and kept pressed, the display could show the following : 

Filter Freq
55   CC74 1  U12

When releasing a finger from the touchpad the display could show :

Control type:

CC

The control would now be edited in the normal way (as in the case of a rotary or slider  control) where the
type, high and low values, display type and MIDI options can be altered.  

In the two displays above the X1 pad is given a name of filter frequency and is set to a Continuous
Controller type (‘CC’) . The continuous controller is number 74 and the current value is 55.

In Play Mode, moving a finger across the touchpad would cause an incrementing value from 0 - 127 to be
output as the finger is moved from left to right.

In Template Edit Mode, to edit the next value, say the Y1 value, the top left quadrant has to be pressed
and so on for the remaining X2 and Y2 controls.

Note: Not all of the four controls have to be programmed for the touchpad. It is perfectly OK to have just
one value (say the X1 axis) programmed for the touchpad.

Y1

Y2

X1

X2

Press the touchpad in
any of the four labeled
quadrants to select the
control for edit