Nortel 2350 Quick Setup Guide
27
Nortel WLAN - Security Switch 2300 Series Quick Start Guide
3
Enter quickstart to access the quickstart wizard.
The quickstart wizard asks a series of questions, as shown in
. You
can enter ? at any time for more help, or press Ctrl+C to quit.
4
Enter save config to save the updated configuration file.
5
Reboot the WSS.
After the switch powers up again, the quickstart configuration changes take effect
immediately.
immediately.
End
Figure 8: Quickstart configuration example
Note: When the script asks: “Do you wish to configure wireless?”, enter n
to skip this process. Wireless configuration will be completed using WMS.
to skip this process. Wireless configuration will be completed using WMS.
2360#
quickstart
This will erase any existing config. Continue? [n]: y
Answer the following questions. Enter '?' for help. ^C to
break out
Answer the following questions. Enter '?' for help. ^C to
break out
System Name [2360]:
Country Code [US]:
Country Code [US]:
CA
System IP address []:
192.168.248.201
System IP address netmask []:
255.255.255.0
Default route []:
192.168.248.1
Admin username [admin]:
Admin password []:
Admin password []:
adminpwd
Do you wish to set the time? [y]:
Enter the date (dd/mm/yy) []:
Enter the date (dd/mm/yy) []:
05/04/06
Enter the time (hh:mm:ss) []:
11:38:00
Enter the timezone []:
AST
Enter the offset from GMT for 'AST' in hh:mm [0:0]:
4:00
Do you wish to configure wireless? [y]:
n
success: created keypair for ssh
success: created keypair for admin
success: created self-signed certificate for admin
success: remember to save this config
success: created keypair for admin
success: created self-signed certificate for admin
success: remember to save this config
2360#
save config