Nortel 2350 Quick Setup Guide
32
NN47250-300 (320655-E
Version 02.01)
5
Click Next.
The Verification Progress dialog box appears.
6
Click Finish.
The WSS is now imported into WMS under the selected plan name. This
finishes the initial configuration of WMS.
finishes the initial configuration of WMS.
End
Creating a Service Profile
With the base setup in place, you are now ready to start provisioning. Complete the following steps to create a Service
Profile for the wireless network:
Profile for the wireless network:
Step
Action
1
Select WSS_model > Wireless > Wireless Services from the navigation tree.
2
Click Create > Custom Service Profile from the smart menu.
The Service Profile Identifier screen appears.
3
4
Click Next.
The Access Types screen appears.
5
Select Open Access from the list of access types.
6
Click Next.
The Open Access VLAN screen appears.
7
Select default from the list of VLANs.
8
Click Finish to complete the Service Profile.
End
Note: SNMP is not enabled by default, and the Enable password has not
been set in the WSS. Ignore the errors these settings generate during the
verification process for now.
been set in the WSS. Ignore the errors these settings generate during the
verification process for now.
Table 8: Service Profile Identifier fields
Field
Description
Name
Specifies a unique name for the Service Profile.
SSID
Specifies the SSID name.
SSID Type
Specifies whether or not the SSID is encrypted.
Select Clear from the list.
Select Clear from the list.