Manualsbrain.com
  1. Manuals
  2. Brands
  3. Nortel
  4. 2350
  5. User Guide

Nortel 2350 User Guide

Download
Page of 758
Rogue detection and counter measures 643
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Displaying RF detection information
You can use the CLI commands listed in 
 to display rogue detection information. 
Table 3.Rogue detection show commands
Command
Description
show rfdetect clients 
[mac mac-addr]
Displays all wireless clients detected on the air. 
show rfdetect counters
Displays statistics for rogue and Intrusion 
Detection System (IDS) activity detected by the 
APs managed by a WSS. 
show rfdetect mobility-domain 
[ssid ssid-name | bssid mac-addr]
Displays information about rogues detected in a 
Mobility Domain.
This command is valid only on the Mobility 
Domain’s seed switch.
show rfdetect data
Displays information about all BSSIDs detected 
on the air, and labels those that are from rogues 
or interfering devices. 
This command is valid on any switch in the 
Mobility Domain.
show rfdetect visible mac-addr
show rfdetect visible 
ap ap-num [radio {1 | 2}]
show rfdetect visible 
ap ap-num [radio {1 | 2}]
Displays the BSSIDs detected by a specific 
Nortel radio. 
show rfdetect countermeasures
Displays the current status of countermeasures 
against rogues in the Mobility Domain.
This command is valid only on the Mobility 
Domain seed.
show rfdetect vendor-list
Displays the list of OUIs that are allowed on the 
network. An OUI identifies a piece of 
networking equipment’s vendor. (See 
.)
show rfdetect ssid-list
Displays the list of SSIDs that are allowed on 
the network. (See 
.)
show rfdetect black-list
Displays the list of wireless clients that are not 
allowed on the network. (See