Nortel 2350 User Guide
Using Auto-RF with Modelling 111
Nortel WLAN Management Software 2300 Series User Guide
5
In the Starting Floor Level box, specify the floor number of the first floor in the building. To start with a
subterranean floor, you can specify 0 or a negative floor number.
subterranean floor, you can specify 0 or a negative floor number.
6
In the Skip Floor Levels box, specify floor numbers you want to skip. Skipping floors is useful when you
want to model only certain floors in a building. Use commas to separate the floor numbers in a list; for
example: 1,3,7 Use a hyphen when entering a range; for example: 8-12.
want to model only certain floors in a building. Use commas to separate the floor numbers in a list; for
example: 1,3,7 Use a hyphen when entering a range; for example: 8-12.
7
Click Finish to close the wizard.
To add a floor to the building
1
In the Organizer panel, click the building name.
2
Select Floor in the Task List panel. The Create Floor wizard prompts you for information about the new
floor.
floor.
3
In the Floor Name box, type the name of the floor (1 to 60 alphanumeric characters, with no spaces or
tabs), and click Next.
tabs), and click Next.
4
To change the default attenuation for radios, type the number of dB in the 802.11a (dB) box or 802.11b/g
(dB) box.
(dB) box.
5
In the Height of the Ceiling box, type the number of feet or meters from the floor to the ceiling (1 to 1000
feet or meters).
feet or meters).
6
Click Finish to close the wizard.