Nortel 1110 User Guide
166
Nortel IP Phone 2007
This section contains the following procedures:
•
•
•
.
•
.
•
•
•
.
After you install and configure an IP Phone, if power to the phone is
interrupted, you need not re-enter the IP parameters, node number,
Terminal Number (TN), or reacquisition of firmware.
interrupted, you need not re-enter the IP parameters, node number,
Terminal Number (TN), or reacquisition of firmware.
Description
The IP Phone 2007 uses the customer IP data network to communicate with
the Communication Server 1000 (CS 1000). The IP Phone 2007 translates
voice into data packets for transport using Internet Protocol. Use a Dynamic
Host Configuration Protocol (DHCP) server to provide information that you
can use for the IP Phone 2007 network and CS 1000 connections.
the Communication Server 1000 (CS 1000). The IP Phone 2007 translates
voice into data packets for transport using Internet Protocol. Use a Dynamic
Host Configuration Protocol (DHCP) server to provide information that you
can use for the IP Phone 2007 network and CS 1000 connections.
shows the IP Phone 2007.
Figure 16
IP Phone 2007
IP Phone 2007
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
02.01
Standard
Release 5.0
7 December 2007
Copyright © 2003–2007, Nortel Networks
.