Nortel 1110 User Guide
Installation
207
Prompt
Response
Description
Applies to an IP Phone 2004 with
KEM = 2, and where <CR> was entered at the KEY prompt.
KEM = 2, and where <CR> was entered at the KEY prompt.
KEY xx
Edit the IP Phone KEM key number specified by
KEMOFST, where:
xx = the number of the key (for example, KEY 36)
KEMOFST, where:
xx = the number of the key (for example, KEY 36)
Enter <CR> to keep the current setting.
Installation
The IP Phone KEM mounts on the right side of an IP Phone 2002 or IP
Phone 2004. The IP Phone KEM snaps into the receptacle on the back
of the IP Phone using the desk-mount bracket and structural baseplate
supplied with the IP Phone KEM (see
Phone 2004. The IP Phone KEM snaps into the receptacle on the back
of the IP Phone using the desk-mount bracket and structural baseplate
supplied with the IP Phone KEM (see
).
The IP Phone KEM connects to the IP Phone 2002 or IP Phone 2004 using
the Accessory Expansion Module (AEM) port on the IP Phone.
the Accessory Expansion Module (AEM) port on the IP Phone.
Figure 22
IP Phone KEM attached to an IP Phone 2002
IP Phone KEM attached to an IP Phone 2002
Procedure 41
Connecting the IP Phone KEM to an IP Phone 2002 or IP Phone 2004
Step
Action
1
Remove the IP Phone from the stand by pressing the IP Phone tilt
handle, and pulling the IP Phone away from the stand.
handle, and pulling the IP Phone away from the stand.
For the IP Phone 2004, you can also adjust the stand angle to
maximum, instead of removing the stand.
maximum, instead of removing the stand.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
02.01
Standard
Release 5.0
7 December 2007
Copyright © 2003–2007, Nortel Networks
.