Nortel 1110 User Guide
![Nortel](https://files.manualsbrain.com/attachments/41d8158aa9dad39109585817452a5513bedfdded/common/fit/150/50/b0df237683acfcba182fca1886fb0237fc1e06fba6e3e77a0d64d1463e4c/brand_logo.jpeg)
Installation and configuration
291
For more information about configuring a virtual loop, see IP
Line Fundamentals (NN43100-500) and Software Input Output
Administration (NN43001-611).
Line Fundamentals (NN43100-500) and Software Input Output
Administration (NN43001-611).
2
Configure the IP Phone 1110 on the Call Server using LD 11. At
the prompt, enter the following
the prompt, enter the following
REQ:chg
TYPE: 1110
For more information about configuring the IP Phone 1110 using LD
11, see Software Input Output Administration (NN43001-611).
11, see Software Input Output Administration (NN43001-611).
CAUTION
The IP Phone 1110 is shipped with the stand and stand
cover locked in position. To avoid damaging the IP Phone,
press the wall-mount lever to release the stand and pull
it away from the base using the tilt lever. See
cover locked in position. To avoid damaging the IP Phone,
press the wall-mount lever to release the stand and pull
it away from the base using the tilt lever. See
.
To release the stand cover, see and
Figure 27
Release the IP Phone 1110 from the stand
Release the IP Phone 1110 from the stand
3
Pull upward on the center catch and remove the stand cover, as
indicated in
indicated in
. The cable
routing tracks are now accessible.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
02.01
Standard
Release 5.0
7 December 2007
Copyright © 2003–2007, Nortel Networks
.