Nortel 1110 User Guide
Replacing an IP Phone 1120E
351
3
Press OK when the node number displays.
If
Then
the node password is enabled and
is not NULL
is not NULL
a password screen displays. Go to
the node password is disabled
a TN screen displays. Go to
.
4
Enter the password at the password screen and press OK.
A TN screen displays.
To obtain the password, enter the nodePwdShow command in
Element Manager. For further information, see Element Manager
System Reference—Administration (NN43001-632).
Element Manager. For further information, see Element Manager
System Reference—Administration (NN43001-632).
5
Select the Clear soft key to clear the existing TN.
6
Enter the new TN.
—End—
Replacing an IP Phone 1120E
ATTENTION
Two IP Phones cannot share the same TN. You must remove the IP Phone 1120E
that currently uses the TN.
that currently uses the TN.
Procedure 71
Replacing an IP Phone 1120E
Step
Action
1
Obtain the node and TN information of the phone you want to
replace.
replace.
2
Disconnect the IP Phone 1120E that you want to replace.
3
Follow
to install and configure the IP Phone 1120E.
4
Enter the same TN and Node Number as the IP Phone 1120E you
replaced. The Call Server associates the new IP Phone 1120E with
the existing TN.
replaced. The Call Server associates the new IP Phone 1120E with
the existing TN.
—End—
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
02.01
Standard
Release 5.0
7 December 2007
Copyright © 2003–2007, Nortel Networks
.