Nortel 1110 User Guide
Text-based diagnostic utilities
485
Function module
Before IP
Address
assignment
Address
assignment
After IP Address
assignment,
unregistered -
Local Mode
assignment,
unregistered -
Local Mode
Registered (TPS)
-
Remote Mode
-
Remote Mode
Call in
progress
(TPS)
progress
(TPS)
Supplicant Status
N/A
N/A
Yes
Yes
Supplicant Authentica
tion Status
tion Status
N/A
N/A
Yes
Yes
Supplicant Device ID
N/A
N/A
Yes
Yes
Supplicant Authenticat
or ID
or ID
N/A
N/A
Yes
Yes
Ping and TraceRoute
The system administrator can use the local diagnostic tools, Ping or
Traceroute command, from a specific endpoint with any arbitrary destination,
typically another endpoint or Signaling Server. Ping and TraceRoute are
available in Local or Remote mode.
Traceroute command, from a specific endpoint with any arbitrary destination,
typically another endpoint or Signaling Server. Ping and TraceRoute are
available in Local or Remote mode.
Ethernet statistics
In Local or Remote Mode, the system administrator can view ethernet
statistics (for example, number of collisions, VLAN ID, speed and duplex) for
the IP Phone on a particular endpoint. The exact statistics depends on what
is available from the IP Phone for the specific endpoint. The user may select
either the Network Port (NIport) or PC port (PCport).
statistics (for example, number of collisions, VLAN ID, speed and duplex) for
the IP Phone on a particular endpoint. The exact statistics depends on what
is available from the IP Phone for the specific endpoint. The user may select
either the Network Port (NIport) or PC port (PCport).
IP Networking statistics
In Local or Remote Mode, the system administrator can view information
about the packets sent, packets received, broadcast packets received,
multicast packets received, incoming packets discarded, and outgoing
packets discarded.
about the packets sent, packets received, broadcast packets received,
multicast packets received, incoming packets discarded, and outgoing
packets discarded.
DHCP information process
In Remote Mode, the system administrator can view DHCP settings (for
example, IP address, S1, S2, and S4 addresses) for each IP Phone. In
Local Mode partial information is available.
example, IP address, S1, S2, and S4 addresses) for each IP Phone. In
Local Mode partial information is available.
UNIStim/RUDP statistics
In Remote Mode, the system administrator can view RUDP statistics (for
example, number of messages sent, received, retries, resets, and uptime)
for the IP Phones.
example, number of messages sent, received, retries, resets, and uptime)
for the IP Phones.
RTP/RTCP statistics
In Remote Mode, the system administrator can view RTP/RTCP QoS
metrics (for example, packet loss and jitter) while a call is in progress.
metrics (for example, packet loss and jitter) while a call is in progress.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
02.01
Standard
Release 5.0
7 December 2007
Copyright © 2003–2007, Nortel Networks
.