Nortel 1110 User Guide
Page 152 of 630
Nortel IP Phone 2007
553-3001-368 Standard 26.00 August 2007
Introduction
This section explains how to install and maintain the IP Phone 2007. For
information on using the IP Phone 2007, see the IP Phone 2007 User Guide.
information on using the IP Phone 2007, see the IP Phone 2007 User Guide.
This section contains the following procedures:
•
•
•
•
•
•
•
Note: After an IP Phone has been installed and configured, if power to
the phone is interrupted, re-entry of the IP parameters, Node Number,
TN, or re-acquisition of firmware is not required.
the phone is interrupted, re-entry of the IP parameters, Node Number,
TN, or re-acquisition of firmware is not required.
Description
The IP Phone 2007 uses the customer IP data network to communicate with
the Communication Server 1000. The IP Phone 2007 translates voice into
data packets for transport using Internet Protocol. A Dynamic Host
Configuration Protocol (DHCP) server can be used to provide information
that enables the IP Phone 2007 network connection, and connection to the
Communication Server 1000.
the Communication Server 1000. The IP Phone 2007 translates voice into
data packets for transport using Internet Protocol. A Dynamic Host
Configuration Protocol (DHCP) server can be used to provide information
that enables the IP Phone 2007 network connection, and connection to the
Communication Server 1000.
shows the IP Phone 2007.