Nortel 1110 User Guide

 Nortel IP Phone 2007

IP Phones

Description, Installation, and Operation

–

If neither SECUREMENU nor PARTSECURE is present, then 
the menu is not locked.

— 5. Lock Now—The Lock Now item immediately exits the Tools 

menu, closes any open Tools menu pages, and locks the Tools menu.

The settings configured in the Lock Menu sub menu override the settings 
received from the DHCP string.

Password protection is enabled during Full DHCP configuration if the 
SECUREMENU parameter, or the PARTSECURE parameter are present at 
the end of the S4 part of the Full DHCP string. If neither the SECUREMENU 
parameter, nor the PARTSECURE parameter is present, password protection 
is not enabled. 

The SECUREMENU/PARTSECURE item is an optional parameter. If it is 
present, then the full S4 string needs to be present, including the action and 
retries. The S4 string will already be present if the XAS support has been 
configured through the DHCP. If XAS is not configured, you can still enable 

password protection by setting the S4 IP address to 0.0.0.0 and by setting the 
other fields to 0.

For further information on configuring Full DHCP, see Data Networking for 
Voice over IP (553-3001-160).

Once the password is entered, the Local Tools menu remains active for 5 
minutes. You can freely navigate, exit and reenter the Local Tools menu 
without being prompted to reenter the password. To reset the timer before the 
5 minute time expires, double-press the Services key. 

With Full DHCP, the vendor-specific or site-specific options must be 
configured depending on the customers DHCP server configuration.