Nortel 1110 User Guide
Page 234 of 630
Nortel IP Softphone 2050
553-3001-368 Standard 26.00 August 2007
If the node password is not configured, or is configured but disabled, go
to Step 3.
to Step 3.
If the node password is configured and enabled for the node, go to Step 4.
3
During startup, the IP Softphone 2050 registers again with the TPS, and
the IP Softphone 2050 displays the existing node number and TN for
approximately five seconds.
the IP Softphone 2050 displays the existing node number and TN for
approximately five seconds.
4
If the password is configured and enabled for the node, the node number
and password prompt displays for approximately 5 seconds; enter the
correct password within this 5-second period.
and password prompt displays for approximately 5 seconds; enter the
correct password within this 5-second period.
If the user activates the Clear soft key during the 5-second period, the
existing node and TN are cleared and the user is prompted for new
parameters.
existing node and TN are cleared and the user is prompted for new
parameters.
End of Procedure
Removing an IP Softphone 2050 from service
Procedure 42
Removing an IP Softphone 2050 from service
Removing an IP Softphone 2050 from service
1
Exit the IP Softphone 2050 application.
2
Uninstall the IP Softphone 2050 application from the PC using the
Windows Add/Remove Programs.
Windows Add/Remove Programs.
3
In LD 11, enter OUT for the TN prompt.
End of Procedure