Nortel 1110 User Guide
Nortel IP Audio Conference Phone 2033
Page 285 of 630
IP Phones
Description, Installation, and Operation
Procedure 49
Installing the IP Audio Conference Phone 2033
for the first time using manual configuration
Installing the IP Audio Conference Phone 2033
for the first time using manual configuration
You will hear a tone shortly before the IP Phone is ready to start the Nortel
IP Phone application. Once the application has loaded and started, you
will see the Nortel logo and Starting DHCP will appear at the bottom of the
screen.
IP Phone application. Once the application has loaded and started, you
will see the Nortel logo and Starting DHCP will appear at the bottom of the
screen.
To edit network configuration the following soft keys are available:
•
OK—accept current settings and proceed to the next configuration
option. If all configuration options are presented, the configuration is
saved and the IP Phone reboots with the saved changes.
option. If all configuration options are presented, the configuration is
saved and the IP Phone reboots with the saved changes.
•
BkSpace—backspace a configuration entry to change it
•
Clear—clear an entire configuration entry
•
Cancel—cancels out of network configuration. The IP Phone reboots
without saving changes.
without saving changes.
1
To enter the configuration menu, press the three soft keys at the bottom
of the display in sequence from left to right.
of the display in sequence from left to right.
2
At the prompt, DHCP Yes/NO?, enter 0 (0 for No).
IMPORTANT!
Timing information
When you see the text Nortel, you have 1 s to respond by pressing the
three soft keys at the bottom of the display in sequence from left to right,
one at a time. If you miss the 1-s response time, the IP Audio
Conference Phone 2033 attempts to locate the connect server. You can
begin the power-up sequence again, or you can double-press the
Services key to open the network diagnostic utilities to access the IP
Phone settings. See Appendix Appendix E:: “IP Phone diagnostic
utilities” on
When you see the text Nortel, you have 1 s to respond by pressing the
three soft keys at the bottom of the display in sequence from left to right,
one at a time. If you miss the 1-s response time, the IP Audio
Conference Phone 2033 attempts to locate the connect server. You can
begin the power-up sequence again, or you can double-press the
Services key to open the network diagnostic utilities to access the IP
Phone settings. See Appendix Appendix E:: “IP Phone diagnostic
utilities” on
.