Nortel 1110 User Guide
Page 344 of 630
Nortel IP Phone 1110
553-3001-368 Standard 26.00 August 2007
Replacing an IP Phone 1110
Procedure 63
Replacing an IP Phone 1110
Replacing an IP Phone 1110
1
Obtain the node and TN information of the phone you want to replace.
2
Disconnect the IP Phone 1110 that you want to replace.
3
Follow Procedure 57 on
, or
4
Enter the same TN and Node Number as the IP Phone 1110 you
replaced. The Call Server associates the new IP Phone 1110 with the
existing TN.
replaced. The Call Server associates the new IP Phone 1110 with the
existing TN.
End of Procedure
Removing an IP Phone 1110 from service
Procedure 64
Removing an IP Phone 1110 from service
Removing an IP Phone 1110 from service
1
Disconnect the IP Phone 1110 from the network or turn off the power.
Note: The service to the PC is disconnected as well if the PC is
connected to the IP Phone 1110.
connected to the IP Phone 1110.
If the IP Phone 1110 was automatically configured, the DHCP lease
expires and the IP address returns to the available pool.
expires and the IP address returns to the available pool.
2
In LD 11, enter OUT at the TN prompt.
End of Procedure
IMPORTANT!
Two IP Phones cannot share the same TN. You must remove the
IP Phone 1110 that is currently using the TN.
IP Phone 1110 that is currently using the TN.