Nortel 1110 User Guide
Page 364 of 630
Nortel IP Phone 1120E
553-3001-368 Standard 26.00 August 2007
•
Configuring the IP Phone 1120E
•
Startup sequence
•
Installing the IP Phone 1120E
Before you begin
Before installing the IP Phone 1120E, complete the following pre-installation
checklist:
checklist:
•
Ensure there is one IP Phone 1120E boxed package for each
IP Phone 1120E being installed. The package contains:
IP Phone 1120E being installed. The package contains:
— IP Phone 1120E
— handset
— handset cord
— 2.1 m (7 ft) CAT5 Ethernet cable
— Number plate and lens
— Getting Started Card
•
Ensure there is one Software License for each IP Phone 1120E being
installed.
installed.
•
Ensure the host Call Server is equipped with the Voice Gateway Media
Card, or a Signaling Server with the Line TPS application.
Card, or a Signaling Server with the Line TPS application.
•
If an AC power adapter is required, ensure the approved Nortel global
power supply (model # N0089601) is used. See Table 42, “IP Phone
1120E components list,” on page 362
power supply (model # N0089601) is used. See Table 42, “IP Phone
1120E components list,” on page 362
First-time installation
You must first install an IP telephony node with the Communication Server.
For information about installing an IP telephony node, see Signaling Server:
For information about installing an IP telephony node, see Signaling Server: