Nortel 1110 User Guide
Page 388 of 630
Nortel IP Phone 1140E
553-3001-368 Standard 26.00 August 2007
Introduction
This section explains how to install and maintain the IP Phone 1140E. For
information on using the IP Phone 140E, see the IP Phone 1140E User Guide.
information on using the IP Phone 140E, see the IP Phone 1140E User Guide.
This section contains the following procedures:
•
•
•
•
•
•
•
Note: After an IP Phone is has been installed and configured, if power
to the phone is interrupted, it is not necessary to reenter IP parameters,
Node Number, TN, nor firmware again.
to the phone is interrupted, it is not necessary to reenter IP parameters,
Node Number, TN, nor firmware again.
Description
The IP Phone 1140E uses the customer IP data network to communicate with
the Communication Server 1000. The IP Phone 1140E translates voice into
data packets for transport using Internet Protocol. A Dynamic Host
Configuration Protocol (DHCP) server can be used to provide information
that enables the IP Phone 1140E network connection, and connection to the
Communication Server 1000.
the Communication Server 1000. The IP Phone 1140E translates voice into
data packets for transport using Internet Protocol. A Dynamic Host
Configuration Protocol (DHCP) server can be used to provide information
that enables the IP Phone 1140E network connection, and connection to the
Communication Server 1000.
shows the IP Phone 1140E.