Nortel 1110 User Guide

 Nortel IP Phone 1140E

553-3001-368 Standard 26.00 August 2007

without being prompted to reenter the password. To reset the timer before the 
5 minute time expires, double-press the Services key. 

You can also press the 5 key to select the Lock Now item from the Lock 
Menu. The Lock Now item immediately exits the Local Tools menu, closes 
any open Local Tools menu pages, and locks the Local Tools menu. 
Alternatively, when time expires, the Local Tools menu and any open 
submenus are closed. Double-press the Services key to open the password 
prompt window to reaccess the Local Tools menu.

If you enter an incorrect password, the Local Tools menu will not open. 
Double-press the Services key to open the password prompt window. Only 
three incorrect password entries are allowed. Any entry after the three 
attempts is ignored for 5 minutes. The password prompt window is visible 
and you can reenter the password but the password is not processed until the 
5 minute time expires.

Note: Some text appears dimmed depending on the current state of the 
menu lock and the configuration of the IP Phone. Only configuration 
options which are enabled from the current state appear active. Menu 
options that are not available appear dimmed.

For more information about configuring the Local Tools menu for the 
IP Phone 1140E, see Appendix Appendix F:: “Configuring the Local Tools 
menu” on 

.

You can assign a maximum of nine functions to the four soft-labeled, 
predefined soft keys. Because the soft keys are predefined, the user cannot 
change the key number assignment. Functions are assigned to the soft keys in 
layers in LD 11. 

The Message Waiting key is numbered 16. 

Functions mapped to key numbers 17 to 26 are assigned to the four soft keys. 
Labels for the soft keys appear in the display area. For further information, 
see “Soft key label display” on page 401. Figure 37 on 

 shows the IP 

Phone 1140E display area.