Nortel 1110 User Guide

 Expansion Module for IP Phone 1100 series

IP Phones

Description, Installation, and Operation

DN/feature key display areas. The telephone on-hook icon is displayed for all 
DN/feature keys. 

Table 60 shows the display diagnostic operation on the IP Phones and the 
Expansion Module for IP Phones 1100 Series.

The Set Info menu displays the firmware version for the IP Phone and any 
attached Expansion Modules. The attached Expansion Modules are identified 
as KEM1, KEM2, and KEM3. KEM1 is the closest to the IP Phone. The 
Expansion Module identifies the firmware as a three character string; the TPS 
displays the firmware in an n.nn format.

Use the Up/Down navigation keys to scroll the list to display the firmware for 
each attached Expansion Module. The firmware version is displayed even if 
the Expansion Module is not configured in LD 11. In this case, the Expansion 
Module is identified in the display area by an asterisk (*) after the Expansion 
Module number (for example, KEM1*).

If an Expansion Module is configured but does not respond, the firmware 
version displays as <unknown>.

initial screen

blank

blank

Full Contrast

set to highest contrast

set to highest contrast

LED Test

blank

blank

Character Test

Characters display across the 
display areas, the telephone 
on-hook icon is displayed.

Characters display across 
the display areas, the 
telephone on-hook icon is 
displayed.