Nortel 1110 User Guide
Nortel IP Phone 2001
Page 51 of 630
IP Phones
Description, Installation, and Operation
Installation and Configuration
The following sections provide a step-by-step guide through the
IP Phone 2001 installation and configuration process:
IP Phone 2001 installation and configuration process:
•
Before you begin
•
First-time installation
•
Configuring the IP Phone 2001
•
Startup sequence
•
Installing the IP Phone 2001
Before you begin
Before installing the IP Phone 2001, complete the following pre-installation
checklist:
checklist:
•
Ensure there is one IP Phone 2001 boxed package for each
IP Phone 2001 being installed. The package contains:
IP Phone 2001 being installed. The package contains:
— IP Phone 2001
— handset
— handset cord
— 2.1 m (7 ft) CAT5 Ethernet cable
— Getting Started Card
•
Ensure there is one Software License for each IP Phone 2001 being
installed.
installed.
•
Ensure the host Call Server is equipped with the Voice Gateway Media
Card, or a Signaling Server with the Line TPS application.
Card, or a Signaling Server with the Line TPS application.
•
If an AC power adapter is required, ensure the correct AC power
transformer is used. The voltage rating of the transformer must match the
wall outlet voltage. See Table 4, “IP Phone 2001 components list,” on
page 49.
transformer is used. The voltage rating of the transformer must match the
wall outlet voltage. See Table 4, “IP Phone 2001 components list,” on
page 49.