Nortel 1110 User Guide

Appendix G: Bluetooth wireless technology

IP Phones

Description, Installation, and Operation

setting is Auto. When the setting is Auto, the setting received from the TFTP 
Device Config file controls whether Bluetooth wireless technology is 
enabled.

When the Bluetooth wireless technology setting is Yes or No, the value 
received from the TFTP Device Config file is saved but is not used. The 
Bluetooth wireless technology administration setting is forced enabled, or 
disabled respectively regardless of the value received in the TFTP Device 
Config file. If the setting is then changed back to Auto, the saved value will 
take effect if no further setting is received through the TFTP server.

Double-press the Services key.

Press 3 on the dialpad to access the Network Configuration menu or 
use the Up/Down navigation keys to scroll and highlight the Network 
Configuration option.

Use the Right navigation key to navigate to the Enable Bluetooth combo 
box. The current setting is displayed. 

Press Enter to start the edit mode.

Use the Down navigation key to open the list. 

Use the Up/Down navigation keys to scroll and highlight the desired 
Bluetooth wireless technology mode.

Press Enter to select the mode and to close the list.

Press Enter to exit the edit mode.

Press the Apply&Reset soft key to save the change and to restart the 
phone.

The new mode takes affect when the IP Phone restarts. If the administrative 
control enabled Bluetooth wireless technology on the phone, the item 3. 
Bluetooth Setup appears in 1. Preferences submenu.