Nortel 1110 User Guide
Page 596 of 630
Appendix G: Bluetooth wireless technology
553-3001-368 Standard 26.00 August 2007
If administrative control is not retrieved, the previously received value is
used. If no value has ever been retrieved, then Bluetooth wireless
technology is disabled by default.
used. If no value has ever been retrieved, then Bluetooth wireless
technology is disabled by default.
If the IP Phone 1140E successfully retrieves the administrative control
and enables Bluetooth wireless technology, 3. Bluetooth Setup appears
in the Preferences menu.
and enables Bluetooth wireless technology, 3. Bluetooth Setup appears
in the Preferences menu.
5
Configure the IP Phone 1140E with a TFTP Server IP address so the
IP Phone can access the TFTP Server.
IP Phone can access the TFTP Server.
6
Press the Services key twice.
7
Press 3 on the dialpad to access the Network Configuration menu or
use the Up/Down navigation keys to scroll and highlight the Network
Configuration option. Press Enter.
use the Up/Down navigation keys to scroll and highlight the Network
Configuration option. Press Enter.
8
Enter the TFTP IP address in the TFTP IP field.
9
Press the Apply&Reset soft key.
End of Procedure
Table 73 lists the 1140e.cfg field names and definitions.
Table 73
1140e.cfg field name definitions (Part 1 of 2)
1140e.cfg field name definitions (Part 1 of 2)
Field name
Field value
Definition
[FW]
Section header for firmware download information
DOWNLOAD_MODE
AUTO
Recommended setting. FW is downloaded when
the IP Phone’s FW version is older than the value
in the 1140e.cfg file’s VERSION field.
the IP Phone’s FW version is older than the value
in the 1140e.cfg file’s VERSION field.
VERSION
0625Cxx
FW version
FILENAME
0625Cxx.bin
image file name, must match the file name of the
FW file
FW file
PROTOCOL
TFTP
Download protocol must be TFTP