Nortel 1110 User Guide
Page 424 of 630
Nortel IP Phone 1140E
553-3001-368 Standard 26.00 August 2007
Full Duplex mode
In the Configuration menu, Auto Negotiate mode is the default setting for
initial startup. Typically, the IP Phone is connected to a network that supports
Auto Negotiate, and it selects the best speed and duplex mode available.
There is no intervention required under normal operation.
initial startup. Typically, the IP Phone is connected to a network that supports
Auto Negotiate, and it selects the best speed and duplex mode available.
There is no intervention required under normal operation.
Note: Changing the speed and/or duplex mode on the phone changes
both the LAN Ethernet port and PC Ethernet Port interfaces.
both the LAN Ethernet port and PC Ethernet Port interfaces.
If the IP Phone is connected to a network configured for Full Duplex mode
only, the IP Phone cannot automatically negotiate the proper configuration.
Therefore, in this instance, to allow the IP Phone to work at the optimum
speed and duplex mode, Full Duplex mode must be enabled.
only, the IP Phone cannot automatically negotiate the proper configuration.
Therefore, in this instance, to allow the IP Phone to work at the optimum
speed and duplex mode, Full Duplex mode must be enabled.
Use Procedure 74 to enable Full Duplex mode.
Procedure 74
Enabling Full Duplex mode
Enabling Full Duplex mode
1
Double-press the Services key to open the Local
Tools menu.
2
Press 3 on the dialpad to access the Network Configuration menu or
use the Up/Down navigation keys to scroll and highlight the Network
Configuration option.
use the Up/Down navigation keys to scroll and highlight the Network
Configuration option.
3
Use the Right navigation key to scroll and highlight the Duplex combo
box.
box.
4
Press Enter to start the edit mode.
5
Press the Down navigation key to open list box.
IMPORTANT!
It is recommended that Auto Negotiate mode is used on the network
and the IP Phone. Use Full Duplex mode only when the network is
forced Full Duplex for 100BT Full Duplex mode, otherwise a duplex
mismatch will result.
and the IP Phone. Use Full Duplex mode only when the network is
forced Full Duplex for 100BT Full Duplex mode, otherwise a duplex
mismatch will result.