Nortel 1110 User Guide
Installation and configuration
113
the LAN must support Power over Ethernet, and an AC adapter is
not required. To use local AC power, the optional AC adapter can be
ordered separately.
not required. To use local AC power, the optional AC adapter can be
ordered separately.
8
Use
to install the IP Phone 2004
for the first time using manual configuration, or use
to install the IP Phone 2004 for the first time using DHCP.
—End—
Startup sequence
When an IP Phone 2004 connects to the network, it must perform a startup
sequence. The elements of the startup sequence include:
sequence. The elements of the startup sequence include:
•
obtaining VLAN ID (if supported by the network infrastructure)
•
obtaining the IP parameters
•
connecting to the Call Server
•
obtaining a User ID
See
for a summary of
the IP parameters and how they are obtained.
Table 13
IP Phone 2004 IP parameters
IP Phone 2004 IP parameters
Parameter
Method of Acquisition
VLAN ID
Manually entered or automatically obtained through
DHCP, and LLDP.
DHCP, and LLDP.
IP Address
Manually entered or automatically retrieved through
Partial or Full DHCP.
Partial or Full DHCP.
Net Mask
Manually entered or automatically retrieved through
Partial or Full DHCP.
Partial or Full DHCP.
Default Gateway Address
Manually entered or automatically retrieved through
Partial or Full DHCP.
Partial or Full DHCP.
Connect Server (IP address, port,
action and retry count—primary and
secondary)
action and retry count—primary and
secondary)
Manually entered or automatically retrieved through Full
DHCP.
DHCP.
User ID (Node ID, Node Password
and TN)
and TN)
Manually entered for first-time configuration. Retrieved
from local storage on subsequent power cycles.
from local storage on subsequent power cycles.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2003–2007, Nortel Networks
.